Equipment Found

Item is a used, Axon heat tunnel. The machine is approximately 4\\\' 6\\\" long and operates on 480 volt, 3 phase power.

Item is a used, Marburg model M 5 neck band applicator with heat tunnel. The machine is currently equipped with \\\\\\\\\\\\\\\"bullets for 59/60mm and 80mm lay-flat film. the infeed is universal with a variable speed, wheel feed. Power requirement is 120 volt single phase. The heat tunnel is 230 volt single phase. The brackets to hang the heat tunnel above an existing conveyor are included with the machine. Machine was manufactured in 1997.

Item is a used, NJM model Scout, single head pressure sensitive labeler. The machine is equipped with an integral conveyor and wrap station. The machine is equipped with an Open Date hot stamp imprinter for code dating. Machine operates on 110 volt single phase power.

Item is a used, M & D series 6000 pressure sensitive labeler. the machine is capable of applying a front and back label from the same roll utilizing a vacuum belt type application..

Item is a used, Compact Labelling Systems model 833 pressure sensitive labeler. Machine has full stainless steel frame and enclosure with wrap station. The wrap station is set up for vacuum so both the front and back label can be applied to a container from a single roll of labels. Both the timing star and the wrap station mount to a through conveyor. The through conveyor was retained by the last owner of this machine but included in the quoted price is independent conveyor that will be added to the machine along with mounting of the backing plate and wrap station. Machine is set up for #4 label.

Item is a New In-Line Labeling Systems Paradigm 700MB pressure sensitive labeler. The Model 700MB is capable of applying one or two body labels and a neck label. In the base configuration it is capable of applying one body label. In the base configuration, there are features of this machine which make it ideal for microbrewery applications. These include a built-in bottle accumulation table, starwheel mechanism for proper bottle spacing for labeling, and an extended conveyor on the infeed end. This makes the machine ideal for labeling either after filling or before filling. Capabilities:  Applies labels from 1” to 4-1/2” tall (optional up to 7-1/2” tall) and 14” long  Labels 1” to 5” diameter containers  1/8” standard label gap  Accepts industry standard 3” diameter label cores  Maximum roll size is 12”  Labels at a rate of 85 labels per minute maximum for an average label  PLC controlled Labeling Head:  Constructed of aircraft-grade aluminum plate with anodizing available  Powered by a variable-speed stepper motor and drive for precise starting and stopping of the web  Photoeye for product detection, even clear bottles  Through-beam photoeye for label gap detection  A main power selector switch, and an operator interface for controlling the delays associated with label placement  Label can be moved up to 6” from the base of the container Wrap Station:  Fully adjustable 3 inch high spin belt powered by a 1/9 HP variable speed AC motor  An adjustable back wiper pad for compression of the label to the container Conveyor:  4-1/2” standard conveyor width; 6” and 7-1/2” optional  All stainless steel construction  32” standard conveyor height; any height optional  72” standard conveyor length; any lengths in 6” increments optional  1/10 hp AC gear head motor  Speed fixed at 700 ipm (variable speed optional) Machine:  Overall machine width 40”  Overall machine height 42”  Machine weight 300 pounds  Power requirement – 120 volts AC, 60 cycle, 6 AMP

Item is a used Marburg model 1250-B, fully automatic neck band applicator with a Marburg model CR 6000 tunnel. The machine was previously utilized in yogurt facility to put a tamper-evident seal on the lids of cups. It is a recent machine with a touch pad interface and is in "very good" to "near-new" condition. The tunnel is approximately 5 inches wide. The machine operates on 120 volt, single phase power.

Item is a used Labeljet, model 2112, automatic pressure sensitive labeler. The machine is equipped with a tamp application attachment. It is currently mounted on a "T" base stand. It requires compressed air and operates on 110 volt single phase power