Equipment Found

OItem is a used, M & D series 6000 pressure sensitive labeler. the machine is capable of applying a front and back label from the same roll utilizing a vacuum belt type application..

Item is a used, 18 inch long (approx.) heat tunnel designed to heat capsules or tamper evident seals on the necks of bottles. The tunnel is suspended over the conveyor and the top and neck of the bottle passes through it. Machine was previously utilized in a winery application.

Item is a used, Standard Knapp, model 930-2B, drop style case packer. The machine is constructed with a mild steel frame. The case infeed is equipped with flap control mechanism. It is currently set up with a 3 lane pack configuration. Additional grid sets are included with the machine. Machine was previously utilized in a winery application with grids for 750 ml bottles. Machine has been upgraded with an Allen Bradly PLC.

Item is a used, Mateer, model 3920 auger filler. This is an automatic machine with a full frame and an integral conveyor. It is equipped with Microset controls. The product hopper is equipped with a slow speed agitator. The auger diameter is 2 1/2 inches. The conveyor is equipped with "container vibrator" mechanism. Machine is all stainless steel construction.

Item is a used, OXE Group dual head, pressure sensitive labeler. The machine was manufactured in 1997 and utilized for applying front/back labels to wine bottles. These machines were represented by Criveller Co. It is a fully automatic machine with an integral conveyor. It is an inline machine utilizing a tri-roller system for bottle rotation and label wipe down.; Operating voltage is 208 volt, 3 phase.

Item is a used, US Bottlers model GE36LS filler. This is a stainless steel, gravity machine equipped with 5/8 inch valves. Included with the machine is the balance tank and balance tank pump, the overflow pump. The machine was set up with a two, tank system. The product supply tank is approximately 200 gallons and measures approximately 3\' diameter with a 4\' straight side. It has a closed top with manway and is equipped with explosion proof level sensing unit. The return tank is approximately 65 gallons and equipped with a hinged lid. Previous use was in a major liquor facility that closed in July 2011. Machine has been well maintained and was in use until plant closing.

Item is a used Bemis, hot melt case sealer. This is a fully automatic machine set up for top seal only. Machine is equipped with a Nordson 3500 hot melt glue system.

Item is a used RA Pearson, hot melt case sealer. This machine is in very good condition and is equipped with a Nordson model 3500 hot melt glue system. Currently set up for 440 volt, 3 phase operation. Machine will be removed from service in September.