Equipment Found

Item is a new 20 bbl 2 vessel steam heated brewsystem. This system is configured for single temperature infusion and includes the following items: -20bbl Mash/ Lauter tun - insulated, stainless clad, #4 finish, side manway door for grain out, top manway door, top mounted variable speed drive with rake and grain out blades, flat frame floor, wedgewire screen, underscreen CIP -Integrated grant, pre-piped with small transfer pump -20bbl Brewkettle/whirlpool - steam jacketed, insulated, stainless clad, #4 finish, dual zone jackets, top manway door, tangential whirlpool inlet, center flange on top for kettle vent -25 bbl hot liquor tank - steam calaandria, insulated, stainless clad, #4 finish, top manway door -Sanitary dual stage heat exchanger with aeration stone and sight glass -Brewhouse platform and control panel with digital temperature controllers for brewkettle and hot liquor tank, and motor starters for pumps, VFD controls for lauter tun drive, PLC interface with map -Brewhouse kettle pump (3hp), HLT pump, and grant pump(1/4hp) -Brewhouse piping, valves, clamps, fittings -Portable transfer pump on cart for cip and misc product transfer *Stainless steel grist case on legs - Add $4860 *20 bbl cold liquor tank - Add $9200 The brewhouse is built locally, fabricated and assembled in Portland, Oregon. Lead time is approximately 18 weeks and terms are 50% deposit with order and balance due prior to shipment. Custom features can be added at cost. We can also offer the following components to go with the brewhouse - 20 bbl fermenters and jacketed brite tanks - $11,100 each 40 bbl fermenters and jacketed brite tanks - $13,400 each Apollo 2-roll mill - $5700

Item is a used 30 bbl production brewery that is still installed and available for inspection. Included are the following: Purchased new in 2008 - Brewing equipment details: 30 bbl brewhouse includes: • 40 bbl Hot Liquor Tank with sight tube, 2 low pressure steam jackets (one on tank bottom and one sidewall) and dedicated hot liquor pump. • Heated Mash Tun with 2 low pressure steam jackets (tank bottom and sidewall), single speed motorized mixing paddle, grist hopper and grist hydrator. Top of grist hopper is 194” above the floor. • Unheated, insulated Lauter Tun with pneumatically height adjustable rakes and frequency controlled motor. Rakes can be manually turned sideways for grain out. Side door for grain out is 52” above floor, Lauter Tun bottom 49” above floor. 82.5” inside dia. • Pump with frequency controller for pumping mash into Lauter Tun, recirulating wort and pumping to Kettle. • 30 bbl Kettle (about 40 bbl gross capacity) has 2 low pressure steam jackets (bottom and sidewall), sidewall window from about 20 – 32.5 bbl level, and whirlpool arm. • Pump with frequency controller for whirlpool and knockout. • 2 stage heat exchanger for wort chilling. • Stainless steel stairs and brewhouse platform. Platform is 201”x158”x64” above floor. Tanks and pumps are hard piped, with manual valves directing flow. One 30 bbl cylindroconical fermentor: 147” tall x 68” dia. Three 60 bbl cylindroconical fermentors: 195” tall x 90” dia. All fermentors have rotating racking arms, and 3 cooling jackets, one in the cone and two in the sidewall. 60 bbl Bright Tank is 130” tall x 90 “ dia, with sight tube and carbonating stone. with frequency controller, 2 cooling zones (bottom and sidewall) and a side door for grain out. 55,000# corrugated steel grain silo, auger to transfer to 2-roll mill, pneumatic conveyor to SS grist hopper with about 1800# max capacity. 2 head keg washer with steam heated cleaning solution baths, single head keg filler. CIP cart with 2 solution tanks, one with electric heating element, and circulating pump. The yeast propagator is a 2 bbl tank with one sidewall cooling jacket, and a low pressure steam heating jacket in the cone which is currently not connected, 2 sample valves and a PRV (pressure relief/vacuum breaker valve). The glycol reservoir is a 5 bbl, insulated tank, and the chiller unit has a 10hp compressor. Canning line is from Cask Brewing Systems, also new in 2008. 5 head automated filler does 60cs/hour with 16oz cans, may also be adjusted to run 12oz cans. The equipment is still installed and available for inspection. Owner is soliciting offers.

Item is a used Pub Brewing Systems Brewery. This system includes the following: Steam Heated brewhouse to include- -Brewkettle/Whirlpool, 84In tall x 60In od, copper clad, steam heated on bottom and sidewall, top manway door -Combi vessel, 100In tall x 60In od, copper clad insulated mash/lauter tun, steam heated HLT, hydrator, 3 piece false bottom -Brewhouse platform with controls, brewery process manifold, Thomsen brewhouse pump, Thermaline T4CH heat exchanger -Brewhouse occupies a space of approx 15Ft x 9Ft Support Equipment -Columbia low pressure steam boiler -Edwards glycol chiller -Roskamp 2-roll mill with auger to MLT Cellar -(4) Pub Manufacturing, 20 bbl jacketed conical fermenters, cone bottom jacketed sidewall, insulated and stainless clad, side manway, CIP, PRV, (3) b/f valves, sample valve, 12Ft tall x 4Ft od -(1) Liquid Asset 20 bbl Fermenter, same as above -Velo 4sqM DE filter -(2) portable transfer pumps on carts -Stainless sink This system was used in a production brewery that closed its doors in January. (4) of the conical tanks were used as fermenters and the fifth conical tank was used as a brite tank. All product was kegged using a manifold off the brite tank. The system appears to be in good condition and is scheduled for removal February 2012.

OItem is a used, M & D series 6000 pressure sensitive labeler. the machine is capable of applying a front and back label from the same roll utilizing a vacuum belt type application..

Item is a used, 18 inch long (approx.) heat tunnel designed to heat capsules or tamper evident seals on the necks of bottles. The tunnel is suspended over the conveyor and the top and neck of the bottle passes through it. Machine was previously utilized in a winery application.

Item is a used, VELO, 3 meter, DE filter. The machine is equipped with vertical screens. Previously utilized in winery application

Item is a used McBrady Engineering, model A-200 orbital air rinser. Machine is set up for a 750 ml wine bottle with two sets of single pocket change parts. Machine has 48 inch diameter pocket rotor.

Item is a used Della Toffola 3m DE filter. This unit was manufactured in 1997 and used in a winery. It has not been used in several years but has been in dry storage in the winery. This unit is equipped with horizontal screens and appears to be in good condition.