Select an industry below to view its inventory list:

For equipment across industries, simply return to our equipment finder on the home page:

New Search

Ager Tank &
Equipment Co.

PO Box 10688
Portland, OR 97296

Phone: (503) 222-7079
Fax: (503) 222-7459

Contact Us

Equipment Found

Page 19 of 25 out of 194 total items

You searched for:

category Petro

Image Item # Name Category
Resina U-40 S/S Inline Capper 4024 Resina U-40 S/S Inline Capper Water, Pharma, Petro, Food, Beverage more info
Used Resina model U-40 Inline capper. The machine is a fully automatic capper utilizing four pairs of tightening quills, with clutches on the last three pairs. It was manufactured in 1988 and has the stainless steel package with stainless steel decks and shafting. It has two pairs of container gripper belts. It is equipped with the highly desirable J41 cap hopper and was running 63mm and 70mm caps. Cap hopper is electric eye controlled. Previous use was in food facility running sauce and salsa type products.
Pump 7-1/2 HP 3980 Pump 7-1/2 HP Water, Food, Beverage, Pharma, Brewing, Petro more info
Used S/S centrifugal pump with a 2 inch intake and a 1 inch discharge port. It is powered with a 7 1/2 HP Baldor motor turning at 3450 RPM.
Consolidated TG-14-31 Capper 3894 Consolidated TG-14-31 Capper Water, Pharma, Petro, Food, Brewing, Beverage more info
Used Consolidated, rotary capper, model TG-14-31. The machine was manufactured in 1987. The machine has 14 capping heads and is equipped with 'Torque-Open' chucks. It is rated at a Normal Operating Rate of approximately 400 BPM. Included with the machine is the stand alone sorting bowl. Machine operation is left to right. Machine is currently set up for a 33mm, flat, plastic, cap. Electrics are 460 volt-3 phase.
Resina S-40 Capper 3882 Resina S-40 Capper Water, Pharma, Petro, Food, Beverage more info
Used Resina, single spindle, model S-40 capper. This is a fully automatic capper. It is equipped with a single, back container gripper and operation is from right to left. This machine is equipped with the lift pin style hopper and is currently set up for a 63 mm cap. Cap hopper is photo eye controlled. It was placed in line, within an existing conveyor so there are no idlers on the conveyor ends. Machine is equipped with pneumatic trip switches on the container and cap feed mechanisms. The mechanical linkages on the main deck of the machine are in very good condition and appear to have recently been replaced.
Lightnin Agitator 3847 Lightnin Agitator Petro, Food, Beverage more info
Used Lightnin 1/3-HP clamp style, air operated agitator drive.
Krones Uncaser/Case Packer 3842 Krones Uncaser/Case Packer Water, Food, Beverage, Pharma, Brewing, Petro more info
Used Krones Model Campac Uncaser / Case Packer. This machine was installed new in approximately 1994 and is represented to be in excellent condition. The machine is designed to accept full cases of empty bottles on one side of the unit for uncasing. On the opposing side of the machine the full bottles are accepted via conveyor for packing into mother cases. This unit is set up to run 24 packs of 12 oz. Longneck and heritage style glass bottles. This machine will also run 22oz. Bottles. The unit includes infeed and discharge bottle/case conveyor and several sets of change parts. The machine will be removed and placed in storage January '05 as the owner is converting to bulk glass. New cost for this machine was well over $100,000.
RA Pearson Case Erector 3798 RA Pearson Case Erector Water, Pharma, Petro, Food, Brewing, Beverage more info
Used R.A. Pearson hot melt case erector. The machine will need a hot melt glue system added as it has been removed. Machine was removed from service when the facility was closed. This is an older machine but was in line and running at time of removal. Electrics are 230/460-3 phase.
RA Pearson Case Erector 3797 RA Pearson Case Erector Petro, Brewing, Pharma, Beverage, Food, Water more info
Used R.A. Pearson, hot melt case erector. The machine is equipped with an LTI Dynaply 21 hot melt glue system. Machine was removed from service when the facility was closed. Electrics are 230/460-3 phase.

Page 19 of 25 out of 194 total items

Revise Search